Main Page - Under Development: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| (8 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Welcome to the openinverter.org Wiki Site. | Welcome to the openinverter.org Wiki Site. | ||
The open inverter project consists of some reference designs for the <u>control hardware</u> using an STM32F103, the <u>inverter firmware</u>, and an easy to use web interface. Other hardware variants include <u>drop in boards</u> | The open inverter project consists of some reference designs for the <u>[[Main Board Version 2|control hardware]]</u> using an STM32F103, the <u>inverter firmware</u>, and an easy to use <u>web interface</u>. Other hardware variants include <u>[https://github.com/damienmaguire/ drop in boards for Tesla]</u> small and large drive units. | ||
If you have received a kit you are probably looking for <u>build instructions</u>. | If you have received a kit you are probably looking for <u>[[Schematics and Instructions|build instructions]]</u>. | ||
If you want to tune your inverter check the <u>parameter description</u>. | If you want to tune your inverter check the <u>[[Parameters|parameter description]]</u>. | ||
You might also want to set up <u>CAN communication</u> or use the inverter as a <u>battery charger</u> also. | You might also want to set up <u>[[CAN communication|CAN communication]]</u> or use the inverter as a <u>[[Battery Charging|battery charger]]</u> also. | ||
If you need help with your EV conversion check out my <u>consulting offers</u>. | If you need help with your EV conversion check out my <u>consulting offers</u>. | ||
| Line 14: | Line 14: | ||
= Hardware = | = Hardware = | ||
* [[Main Board Version 3]] | |||
* [[Main Board Version 2]] | |||
* [[Main Board Version 1]] | |||
* [[Sense Boards]] | |||
* [[Gate Driver]] | |||
* [[Hardware Theory of Operation]] | |||
* [[Sensor Board|Legacy Sensor Board]] | |||
= Software = | = Software = | ||
* [[Software Theory of Operation]] | |||
* [[CAN communication]] | |||
* [[Parameters]] | |||
== | * [[Downloads]] | ||
== | * [[Errors]] | ||
= Inverter Kits = | |||
* [[Features]] | |||
* [[Schematics and Instructions]] | |||
* [[Battery Charging]] | |||
= Tesla Boards = | |||
= Conversion Projects = | |||
* [[VW Polo 86C Conversion]] | |||
= General = | |||
* [[Configuration Files]] | |||
Latest revision as of 02:31, 30 March 2019
Welcome to the openinverter.org Wiki Site.
The open inverter project consists of some reference designs for the control hardware using an STM32F103, the inverter firmware, and an easy to use web interface. Other hardware variants include drop in boards for Tesla small and large drive units.
If you have received a kit you are probably looking for build instructions.
If you want to tune your inverter check the parameter description.
You might also want to set up CAN communication or use the inverter as a battery charger also.
If you need help with your EV conversion check out my consulting offers.
Finally, if you want to support the project visit the shop, become a Patron or send donations to paypal 'at' johanneshuebner.com .
Hardware
- Main Board Version 3
- Main Board Version 2
- Main Board Version 1
- Sense Boards
- Gate Driver
- Hardware Theory of Operation
- Legacy Sensor Board