Main Page: Difference between revisions
Jump to navigation
Jump to search
(Added content migrated from openinverter.org/docs/) |
mNo edit summary |
||
| Line 8: | Line 8: | ||
You might also want to set up <u>[[CAN communication|CAN communication]]</u> or use the inverter as a <u>[[Battery Charging|battery charger]]</u> also. | You might also want to set up <u>[[CAN communication|CAN communication]]</u> or use the inverter as a <u>[[Battery Charging|battery charger]]</u> also. | ||
<!--> | |||
If you need help with your EV conversion check out my <u>consulting offers</u>. | If you need help with your EV conversion check out my <u>consulting offers</u>. | ||
Finally, if you want to support the project <u>visit the shop</u>, become a <u>Patron</u> or send donations to paypal 'at' johanneshuebner.com . | Finally, if you want to support the project <u>visit the shop</u>, become a <u>Patron</u> or send donations to paypal 'at' johanneshuebner.com . | ||
<--> | |||
= Hardware = | = Hardware = | ||
* [[Main Board Version 3]] | * [[Main Board Version 3]] | ||
Revision as of 02:36, 30 March 2019
Welcome to the openinverter.org Wiki Site.
The open inverter project consists of some reference designs for the control hardware using an STM32F103, the inverter firmware, and an easy to use web interface. Other hardware variants include drop in boards for Tesla small and large drive units.
If you have received a kit you are probably looking for build instructions.
If you want to tune your inverter check the parameter description.
You might also want to set up CAN communication or use the inverter as a battery charger also.
Hardware
- Main Board Version 3
- Main Board Version 2
- Main Board Version 1
- Sense Boards
- Gate Driver
- Hardware Theory of Operation
- Legacy Sensor Board