Draft:Main Page

Welcome to the openinverter.org Wiki Site.

The open inverter project consists of some reference designs for the control hardware using an STM32F103, the inverter firmware, and an easy to use web interface. Other hardware variants include drop in boards for Tesla small and large drive units.

If you have received a kit you are probably looking for build instructions.

If you want to tune your inverter check the parameter description.

You might also want to set up CAN communication or use the inverter as a battery charger also.

Hardware

• Main Board Version 3
• Main Board Version 2
• Main Board Version 1
• Sense Boards
• Gate Driver
• Hardware Theory of Operation
• Legacy Sensor Board

Software

• Software Theory of Operation
• CAN communication
• Parameters
• Downloads
• Errors

Inverter Kits

• Features
• Schematics and Instructions
• Battery Charging

Conversion Projects

• VW Polo 86C Conversion

General

• Configuration Files