Search results
Jump to navigation
Jump to search
Page title matches
- [[File:M3driver.png|thumb|458x458px|m3 inverter replacement pcb]] the model 3 drive unit inverters feature a PCB with both HV and LV circuits, the gate drivers, and logic. thus a simple re ...2 KB (266 words) - 20:48, 18 November 2025
Page text matches
- [[File:M3driver.png|thumb|458x458px|m3 inverter replacement pcb]] the model 3 drive unit inverters feature a PCB with both HV and LV circuits, the gate drivers, and logic. thus a simple re ...2 KB (266 words) - 20:48, 18 November 2025
- * Uses Model 3 based inverter, confirmed same PCB # as other M3 based units ** PCB: 1078289 ...1 KB (187 words) - 12:04, 13 July 2023
- * [[Files Tesla|Schematics, pcb layouts, BOMs and Gerber files]] ...758 bytes (96 words) - 10:15, 14 June 2023
- ...shi Outlander AC Inverter 37129-01001 Main PCB Measurements.jpg|thumb|Main PCB with dimensions, HV DC connections top right, AC outlet bottom right, 4 pin ...2 KB (337 words) - 21:03, 22 May 2023
- ...in the openinverter shop, the EVBMW shop or that you order yourself from a PCB manufacturer are self-supported. It means you need to research the needed i ...989 bytes (161 words) - 11:10, 16 June 2025
- Schematic and pcb layout uploaded to github : https://github.com/damienmaguire/Yaris-Auris-In Schematic and pcb layout for Dual Motor boards on Github here : https://github.com/damienmagu ...4 KB (709 words) - 17:04, 20 December 2024
- [[Tesla Model 3 Drive Unit PCB]] https://github.com/davefiddes/stm32-sine (STM32 replacement PCB firmware dev. branch) ...6 KB (825 words) - 19:07, 18 November 2025
- ...ard - this replicates the Rev2 functionality and adapter board on a single PCB. It also integrates a Lebowski controller for the third small power stage. ...3 KB (467 words) - 07:00, 7 January 2025
- Before you start soldering, test fit the PCB to see if the remaining holes line up with the threaded mounts of the enclo ...eed two small screws and nuts to secure the 56 pin header connector to the PCB so it is secured during soldering. ...12 KB (1,837 words) - 10:12, 14 June 2023
- ...ent magnet motor with the control and driver boad mounted on the back. The PCB is not easily removable as the wiper contacts on the board are spot welded ...3 KB (493 words) - 14:03, 20 December 2024
- |'''PCB''' |A '''printed circuit board''' ('''PCB''') mechanically supports and electrically connects electrical or electroni ...11 KB (1,489 words) - 13:01, 2 December 2024
- ...is at the correct level (5V) and being fed to the correct pins. Test each PCB individually before connecting it to the system. ...talk. To increase your current range simple put a spacer between cable and PCB. ...14 KB (2,470 words) - 08:12, 9 July 2025
- This is a Molex MX150L panel-mount PCB 19428-0001 plug. For installations where there is only a Single OBC instal ...configuration. Note "parked" harness WWMA2 on Rear HVJB.]]It has a small PCB soldered to its rear, which contains ONLY (3) 180 ohm resistors, wired in p ...14 KB (2,427 words) - 16:59, 20 December 2024
- ...many times. At some times, I have felt heat purge through the cover of the PCB when I messed up some blue connectors, but they seem to not take damage. So ...6 KB (940 words) - 06:47, 30 August 2024
- ...via eBay etc. for well under USD$20 (Apr2023). Variants include a single-PCB version, and a version with a mains pass-through which uses two PCBs. Both ...6 KB (901 words) - 13:21, 20 November 2024
- | || PCB || || x |PCB ...16 KB (2,387 words) - 09:49, 11 May 2025
- PCB-only kit: https://openinverter.org/shop/index.php?route=product/product&pro ...6 KB (1,026 words) - 15:29, 21 November 2025
- ...completely. With the cover removed, the orange wires simply connect to the PCB using ring terminals and M4 screws. Removing the cover will have no effect ...7 KB (1,083 words) - 16:37, 20 December 2024
- ...s for PCB V1 are publicly available on GitHub, design files for the latest PCB release (V1.a) are only available through [https://www.patreon.com/c/evbmw/ * [https://github.com/damienmaguire/Stm32-vcu Github with PCB, schematic, pin-outs, etc] ...21 KB (3,078 words) - 01:42, 13 October 2025
- ...e the gate drivers directly onto the corresponding pins of the module. The PCB has been designed to line up. Make use of that. 1cm of wire should be enoug ...7 KB (1,198 words) - 12:45, 2 December 2024