Nice how much watts are your battery pack looking for batteries for my 1991 CE Mercedes Conversion with rear SDU have a tight fit had to relocate inverter in the trunk. have no problem
with battery space. This Mercedes came with the M401 cast iron engine over 1000 lbs.
Keep up the good work.

See my ...

I did the cover plates with a roter bit.over the inverter edge
Pcb encoder connection at motor cover

Tesla inverter relocation inverter HV and Encoder new cable routes.
All done on 3D printer.

Inverter for SDU HV Cover STL file

PCB design to connect the Encoder from the motor.

Update

Inverter 1 inch off set Spacer STL files

Yes I'm doing it for my 1991 300ce mercedes-benz conversion project. Only have 18.5 in to install sdu rear.
See pics

Thanks a lot I was confused too.

Keep it up don't give up you can do it

That's weird my SDU unit runs forward like it should
Using v5 logic board done by jclpcb and populated my self.
JOHU HELP WITH THE PARAMETERS

GOOD WAY TO START THE YEAR JOHU !!!!!!!!

Johu !! good news uploaded the parameters calibrated the throttle and WOW I hit the throttle to much the motor lifted from the front and knocked my level off.
Motor is working Thanks a lot goanna have to Patronize for the good help and learning.
Thanks very one.

OK Johu thanks a lot will do take care.
will try this out.
I am using V5.14R

Johu here are some pics of the web parameters
with no voltage applied.

Here is the Parameter file.

My main relay is cutting off when sending throttle signals.
341 dc at battery pack
Udc = 416v
Udcsw set to 80% of 341 =275v
BMW E46 pedal
Tesla SDU Logic board v5 open inverter organization board.
Every thing okay except cuts off my main relay.
Some times the motor makes a sound to spin
Any body ...

Hopefully this one will be OK

Just got a inverter waiting for its arrival

Today I put in a new logic board from JLCPCB supplied with Damien's Gerber file they sent me 5 populated boards.
And found same results as with the former one .
CONCLUSION BAD INVERTER. WELL SHIT HAPPENS.
LOOKING FOR A SDU INVERTER.

I hope the Gerber files are good.

New lower profile design for wifi using Wimos Di Mini wifi.
See picture

Finally got all electronic in car ready to install.
Had to buy a rear drive unit due to mounts .
See picture.

New update rear SDU INVERTER relocation have only 18.5 inch space sdu without inverter 17 inch.
Had to relocate ...

Looks like my IGBT Connection 5 is bad any one knows the info for this connection model number ect ..........

Yes I do 344v

In the pic correction Vd is 230mv not 230.5v.
Input voltage =output voltage = 344vdc
Therfore this proves that the capacitors are changing .

After checking all voltage and continuity of IGBT conn 5
And continuity from pin 1 to R31 to Pin 11 on the STM32

My conclusion is that the 24 ...

See picture

I see that the SDU HV cables have a small box connected to the + HV cable.
My cable doesn't have that I have my own HV Box and fuse. CAN THAT BE A PROBLEM WITH THE INVERTER.

See picture

Thanks Isaac96 take care looks like another inverter will look for one on Ebay

Here are the pictures of the inside of the inverter input HV
Any thing abnormal?

UDC=1.78V now