Fully Open CCS Charge Controller (FOCCCI): Difference between revisions
Jump to navigation
Jump to search
(Added to categories) |
(Added image) |
||
| Line 1: | Line 1: | ||
Disclaimer: This Page is still work in progress! Any information written here is a draft only and should be handled as such. Contributions more then welcome. If you have questions please ask them in the discussion section of the page or in the OpenInvert Forum. | Disclaimer: This Page is still work in progress! Any information written here is a draft only and should be handled as such. Contributions more then welcome. If you have questions please ask them in the discussion section of the page or in the OpenInvert Forum. | ||
[[File:Foccci pinout.svg|thumb|Foccci pinout]] | |||
| Line 5: | Line 6: | ||
Here you will find documentation on the Hardware, where to get it (or how to build it yourself), News regarding the development and many more great things. | Here you will find documentation on the Hardware, where to get it (or how to build it yourself), News regarding the development and many more great things. | ||
Focci runs on the reference software [[CCS32Clara]] (also referred to as Clara). | Focci runs on the reference software [[CCS32Clara]] (also referred to as Clara). | ||
Revision as of 17:23, 14 December 2023
Disclaimer: This Page is still work in progress! Any information written here is a draft only and should be handled as such. Contributions more then welcome. If you have questions please ask them in the discussion section of the page or in the OpenInvert Forum.
This page is about FOCCI. FOCCI is an open source CCS Charge Controller started by Uhi and developed by the OpenInverter Community.
Here you will find documentation on the Hardware, where to get it (or how to build it yourself), News regarding the development and many more great things.
Focci runs on the reference software CCS32Clara (also referred to as Clara).