Tesla Model 3 Drive Unit PCB

From openinverter.org wiki
Revision as of 02:17, 9 November 2025 by Bratitude (talk | contribs)
Jump to navigation Jump to search

Open Source logic board for the Tesla Model 3 rear drive unit. Based on the inverter designed by Johannes Heubner using FOC control.


the model 3 drive unit inverters feature a PCB with both HV and LV circuits, the gate drivers, and logic. thus a simple replacement brain board is not possible. canbus contorl is complicated and requires use of tesla's diagnostics software for inverter pairing. this is a legal greyzone and not a fully opensource option. Instead a full fledged replacement board with gate drivers was designed to allow full lobotomization of elon, thus gaining full opensource control of the model 3/y drive units!


https://github.com/damienmaguire/Tesla-Model-3-Drive-Unit

https://github.com/davefiddes/stm32-sine

https://www.evbmw.com/index.php/evbmw-webshop/tesla-boards/tesla-model-3-du-beta


parts needed to be fitted:

-current sensors: MLX91209LVA-CAA-002-SP

-gate drivers: STGAP1BSTR

-power transformer: VGT22EPC-200S6A12

Retrieved from "https://openinverter.org/wiki/index.php?title=Tesla_Model_3_Drive_Unit_PCB&oldid=5926"