Introduction TIM

From openinverter.org wiki

Revision as of 19:58, 23 December 2019 by Joromy (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

The new ECU for the Ford Ranger TIM (traction inverter module) is based on the openinverter V2 board. It uses the original TIM's power eletronics, IGBT drivers, current sensors and voltage sensors.

So most of the information for the openinverter V2 board is also relevant for the Ranger inverter.

Just started to make the "Ranger TIM" Wiki, so most of the information is at the openinverter forum Ford Ranger section

Retrieved from "https://openinverter.org/wiki/index.php?title=Introduction_TIM&oldid=247"