Ford Ranger TIM Controller

From openinverter.org wiki
Revision as of 21:08, 9 October 2021 by Bratitude (talk | contribs)
Jump to navigation Jump to search

The new ECU for the Ford Ranger TIM (traction inverter module) is based on the openinverter design. It uses the original TIM's power eletronics, IGBT drivers, current sensors and voltage sensors.

So most of the information for the openinverter V2 board is also relevant for the Ranger inverter.

Just started to make the "Ranger TIM" Wiki, so most of the information is at the openinverter forum Ford Ranger section

Schematics and connector pinout

joromy_tim_w_GND_fill_15b - Schematic.pdf

Retrieved from "https://openinverter.org/wiki/index.php?title=Ford_Ranger_TIM_Controller&oldid=1755"