Tesla Model 3 Drive Unit PCB: Difference between revisions
Created page with "Open Source logic board for the Tesla Model 3 rear drive unit. Based on the inverter designed by Johannes Heubner using FOC control. the model 3 drive unit inverters feature a PCB with both HV and LV circuits, the gate drivers, and logic. thus a simple replacement brain board is not possible....instead a full fledged replacement board with gate drovers was designed to allow full lobotomization of elon and gaining opensource control of the model 3/y drive units! https..." |
No edit summary |
||
| Line 10: | Line 10: | ||
https://www.evbmw.com/index.php/evbmw-webshop/tesla-boards/tesla-model-3-du-beta | https://www.evbmw.com/index.php/evbmw-webshop/tesla-boards/tesla-model-3-du-beta | ||
parts needed to be fitted: | |||
-current sensors: MLX91209LVA-CAA-002-SP | |||
-gate drivers: STGAP1BSTR | |||
-power transformer: VGT22EPC-200S6A12 | |||
Revision as of 02:15, 9 November 2025
Open Source logic board for the Tesla Model 3 rear drive unit. Based on the inverter designed by Johannes Heubner using FOC control.
the model 3 drive unit inverters feature a PCB with both HV and LV circuits, the gate drivers, and logic. thus a simple replacement brain board is not possible....instead a full fledged replacement board with gate drovers was designed to allow full lobotomization of elon and gaining opensource control of the model 3/y drive units!
https://github.com/damienmaguire/Tesla-Model-3-Drive-Unit
https://github.com/davefiddes/stm32-sine
https://www.evbmw.com/index.php/evbmw-webshop/tesla-boards/tesla-model-3-du-beta
parts needed to be fitted:
-current sensors: MLX91209LVA-CAA-002-SP
-gate drivers: STGAP1BSTR
-power transformer: VGT22EPC-200S6A12