CAD Models: Difference between revisions
Jump to navigation
Jump to search
m →Batteries: Added E208 Module |
|||
| (7 intermediate revisions by 3 users not shown) | |||
| Line 89: | Line 89: | ||
|Manny | |Manny | ||
|[https://grabcad.com/library/e208-module-1 https://grabcad.com/] | |[https://grabcad.com/library/e208-module-1 https://grabcad.com/] | ||
|- | |||
|Hyundai | |||
|Hyundai Ioniq 5 / Kia EV6 2P6S module | |||
|GrabCAD | |||
|Rick Mellor | |||
|[https://grabcad.com/library/hyundai-ioniq-5-2p6s-battery-scan-1 https://grabcad.com/] | |||
|- | |||
|VAG | |||
|Porsche Taycan / Audi e-Tron GT module | |||
|GrabCAD | |||
|Alex | |||
|[https://grabcad.com/library/battery-module-etron-taycan-1 https://grabcad.com/] | |||
|- | |||
|LG Chem | |||
|Chrysler Pacifica 16s module | |||
|GrabCAD | |||
|DIY ElectricCar | |||
|[https://grabcad.com/library/pacifica-lgchem-16s-battery-module-1 https://grabcad.com/] | |||
|- | |||
|VW | |||
|ID3/4 module | |||
|GrabCAD | |||
|Paul Baque | |||
|[https://grabcad.com/library/vw-id3-and-id4-battery-module-1 https://grabcad.com/] | |||
|} | |} | ||
| Line 129: | Line 153: | ||
| | | | ||
|[https://grabcad.com/library/prius-gen-3-inverter-1 https://grabcad.com/] | |[https://grabcad.com/library/prius-gen-3-inverter-1 https://grabcad.com/] | ||
|- | |||
|Toyota | |||
|Prius (Gen 3) Inverter | |||
|Openinverter Forum | |||
|Anders | |||
|[https://openinverter.org/forum/viewtopic.php?p=89252#p89252 https://openinverter.org/forum/] | |||
|- | |- | ||
|Toyota | |Toyota | ||
| Line 249: | Line 279: | ||
|Model S/X SRDU | |Model S/X SRDU | ||
|GrabCAD | |GrabCAD | ||
GrabCAD | |||
|James Warner | |James Warner | ||
Jamie Jones | |||
|https://grabcad.com/library/tesla-rear-small-drive-unit-3d-scan-1 | |https://grabcad.com/library/tesla-rear-small-drive-unit-3d-scan-1 | ||
https://grabcad.com/library/tesla-front-sdu-plates-1 | |||
|- | |- | ||
|Tesla | |Tesla | ||
| Line 281: | Line 314: | ||
| Volt Influx | | Volt Influx | ||
| https://grabcad.com/library/outlander-phev-rear-motor-1 and https://grabcad.com/library/outlander-phev-rear-gearbox-1 | | https://grabcad.com/library/outlander-phev-rear-motor-1 and https://grabcad.com/library/outlander-phev-rear-gearbox-1 | ||
|- | |||
|MG | |||
|ZS 2017-2020 Front unit | |||
|GrabCAD | |||
|LRBen | |||
|https://grabcad.com/library/2017-2020-mg-zs-front-drive-unit-1 | |||
|- | |||
|Jaguar | |||
|iPace Front Motor | |||
|GrabCAD | |||
|Jamie Jones | |||
|https://grabcad.com/library/jaguar-ipace-front-motor-1 | |||
|} | |} | ||
| Line 439: | Line 484: | ||
|TRW | |TRW | ||
|From Opel Astra | |From Opel Astra | ||
| | |GrabCAD | ||
|J0hannes | |J0hannes | ||
|[https://grabcad.com/library/trw-powersteering-pump-1 Link] | |[https://grabcad.com/library/trw-powersteering-pump-1 Link] | ||
| Line 446: | Line 491: | ||
|BMW | |BMW | ||
|I3 | |I3 | ||
| | |GrabCAD | ||
|Wim Boone | |Wim Boone | ||
|[https://grabcad.com/library/bmw-i3-lim-1 https://grabcad.com/] | |[https://grabcad.com/library/bmw-i3-lim-1 https://grabcad.com/] | ||
| Line 453: | Line 498: | ||
|Tesla | |Tesla | ||
|Model 3/Y | |Model 3/Y | ||
| | |GrabCAD | ||
|Wim Boone | |Wim Boone | ||
|[https://grabcad.com/library/tesla-model-3-y-contactor-1 https://grabcad.com/] | |[https://grabcad.com/library/tesla-model-3-y-contactor-1 https://grabcad.com/] | ||
| Line 460: | Line 505: | ||
|Tesla | |Tesla | ||
|Model 3/Y | |Model 3/Y | ||
| | |GrabCAD | ||
|Wim Boone | |Wim Boone | ||
|[https://grabcad.com/library/tesla-model-3-y-ccs-contactor-1 https://grabcad.com/] | |[https://grabcad.com/library/tesla-model-3-y-ccs-contactor-1 https://grabcad.com/] | ||
| Line 467: | Line 512: | ||
|Tesla | |Tesla | ||
|Model 3/Y | |Model 3/Y | ||
| | |GrabCAD | ||
|Wim Boone | |Wim Boone | ||
|[https://grabcad.com/library/tesla-model-3-y-12v-connector-penthouse-1 https://grabcad.com/] | |[https://grabcad.com/library/tesla-model-3-y-12v-connector-penthouse-1 https://grabcad.com/] | ||
| Line 474: | Line 519: | ||
|Honda | |Honda | ||
|Element | |Element | ||
| | |GrabCAD | ||
|Matt Boyce | |Matt Boyce | ||
|[https://grabcad.com/library/honda-accelerator-pedal-sensor-scan-1 https://grabcad.com/] | |[https://grabcad.com/library/honda-accelerator-pedal-sensor-scan-1 https://grabcad.com/] | ||
|- | |||
|Empty battery tray | |||
|Tesla | |||
|Model 3 | |||
|GrabCAD | |||
|Kaleb Reinhart | |||
|[https://grabcad.com/library/tesla-model-3-battery-enclosure-tray-3d-scan-1 https://grabcad.com] | |||
|- | |||
|BMS | |||
|Orion | |||
|24 - 180 cell models | |||
|Orion | |||
|Orion | |||
|[https://www.orionbms.com/downloads/drawings/orionbms2_enclosure_3d_drawings.zip https://www.orionbms.com/] | |||
|} | |} | ||
| Line 484: | Line 543: | ||
''Example request: Motor - Nissan - Leaf Gen 1 EM61 (without gearbox)'' | ''Example request: Motor - Nissan - Leaf Gen 1 EM61 (without gearbox)'' | ||
Motor - Lexus - GS300H | |||
Engine compartment - BMW - E9x | |||
Battery pack - BMW - PHEV | |||
''Note: If anyone is able to take a scan or source an existing model for a request, please add it to the tables above and remove the request from this section. Many thanks.'' | ''Note: If anyone is able to take a scan or source an existing model for a request, please add it to the tables above and remove the request from this section. Many thanks.'' | ||
[[Category:CAD]] [[Category:Resources]] | [[Category:CAD]] [[Category:Resources]] | ||
Latest revision as of 17:52, 12 April 2026
This section has been added to allow people to post external links to existing CAD models that are freely available and are broken up by subcategory. Many models are already available, however if you can't find an existing model, there is a section at the end labelled Requests where members can login and simply add a line to this section with a short description of the component they would like.
Please note: all models should include an external link with an acknowledgement to the host and original creator.
Batteries
| Manufacturer | Model | Host Site | Author/Creator | Link |
|---|---|---|---|---|
| LG Chem | 4p3s Module | Zero EV | Chris Hazell | https://zero-ev.co.uk/cad/ |
| CALB | 3p4s Module | Zero EV | Chris Hazell | https://zero-ev.co.uk/cad/ |
| Nissan | Leaf Gen 1 Cell | GrabCAD | Brock Winberg | https://grabcad.com/ |
| Nissan | Leaf 24 kWh pack | GrabCAD | Kevin Kuehn | https://grabcad.com/ |
| Tesla | Model S/X 5.3kWh Battery Module | Openinverter Forum | https://openinverter.org/forum/ | |
| Tesla | Model 3 Passenger side inboard battery module | Openinverter Forum | https://openinverter.org/forum/ | |
| Tesla | Model 3 Passenger side outboard battery module | Openinverter Forum | https://openinverter.org/forum/ | |
| Tesla | Model 3 Driver side inboard battery module | Openinverter Forum | https://openinverter.org/forum/ | |
| Tesla | Model 3 Driver side outboard battery module | Openinverter Forum | https://openinverter.org/forum/ | |
| Tesla | Full Model S Battery Pack | GrabCAD | saurabh dhuri | https://grabcad.com/ |
| Mitsubishi | Outlander Yuasa 8 cell module | GrabCAD | https://grabcad.com/ | |
| VW | GTE Golf/Pasaat 2x12s module with plate | GrabCAD | TomdB | https://grabcad.com/ |
| Stellantis | Peugeot E-208/Corsa E 50kWh module | GrabCAD | Manny | https://grabcad.com/ |
| Hyundai | Hyundai Ioniq 5 / Kia EV6 2P6S module | GrabCAD | Rick Mellor | https://grabcad.com/ |
| VAG | Porsche Taycan / Audi e-Tron GT module | GrabCAD | Alex | https://grabcad.com/ |
| LG Chem | Chrysler Pacifica 16s module | GrabCAD | DIY ElectricCar | https://grabcad.com/ |
| VW | ID3/4 module | GrabCAD | Paul Baque | https://grabcad.com/ |
Inverters
| Manufacturer | Model | Host Site | Author/Creator | Link |
|---|---|---|---|---|
| Nissan | Leaf Gen 2 Drive Unit | GrabCAD | Paul Baque | https://grabcad.com/ |
| Nissan | Leaf Gen 2 (EM57) | GrabCAD | James Harris | https://grabcad.com |
| Nissan | Leaf Gen 1 Inverter | GrabCAD | coming soon | |
| Toyota | Yaris (Gen 3) Inverter | GrabCAD | coming soon | |
| Toyota | Prius (Gen 3) Inverter | GrabCAD | https://grabcad.com/ | |
| Toyota | Prius (Gen 3) Inverter | Openinverter Forum | Anders | https://openinverter.org/forum/ |
| Toyota | Prius (Gen 2) Inverter | GrabCAD | coming soon | |
| Lexus | GS-450H Inverter phone scan | GrabCAD | https://grabcad.com/ | |
| Lexus | GS-450H Inverter scan | GrabCAD | TomdB | https://grabcad.com/ |
| Lexus | IS-300H Inverter | GrabCAD | TomdB | https://grabcad.com/l |
| Mitsubishi | Outlander Rear | GrabCAD | TomdB | https://grabcad.com/ |
Motors
| Manufacturer | Model | Host Site | Author/Creator | Link |
|---|---|---|---|---|
| Lexus | GS-450H | GrabCAD | coming soon | |
| Nissan | Leaf Gen 1 (EM61) with gearbox | GrabCAD | coming soon | |
| Nissan | Leaf Gen 2 (EM57) | GrabCAD | Julius Wächter | https://grabcad.com |
| Nissan | Leaf Gen 2 (EM57) | GrabCAD | James Harris | https://grabcad.com |
| Toyota | Prius Gen 3 Transaxle | GrabCAD | coming soon | |
| Toyota | Prius Gen 2 Transaxle | GrabCAD | coming soon | |
| Toyota | MGR | GrabCAD | TomdB | https://grabcad.com/ |
| Mitsubishi | Outlander Rear | GrabCAD | TomdB | https://grabcad.com/ |
| Lexus | GS450h Gearbox | GrabCAD | TomdB | https://grabcad.com/ |
Drive Units (motor/gearbox/inverter)
Chargers
| Manufacturer | Model | Host Site | Author/Creator | Link |
|---|---|---|---|---|
| Mitsubishi | Outlander | GrabCAD | TomdB | https://grabcad.com/ |
| Nissan | Leaf Gen 1 | GrabCAD | coming soon | |
| Tesla | Model S Gen 2 | Openinverter Forum | https://openinverter.org/forum/ | |
| Tesla | PCS | GrabCAD | Wim Boone | https://grabcad.com/ |
Gearboxes
| Manufacturer | Model | Host Site | Author/Creator | Link |
|---|---|---|---|---|
| Mitsubishi | Outlander Rear | GrabCAD | TomdB | https://grabcad.com |
| Nissan | Leaf | GrabCAD | James Harris | https://grabcad.com |
HV Components
| Manufacturer | Model | Host Site | Author/Creator | Link |
|---|---|---|---|---|
| AC Compressor | Nissan | GrabCAD | James Harris | https://grabcad.com |
| Mitsubishi | Outlander Water Heater | GrabCAD | TomdB | https://grabcad.com/ |
| Mitsubishi | Outlander AC Compressor | GrabCAD | TomdB | https://grabcad.com/ |
| VW | Egolf/GTE Heater | GrabCAD | TomdB | https://grabcad.com/ |
| VW | Egolf/GTE AC Compressor | GrabCAD | TomdB | https://grabcad.com/ |
| VW | IDx Air PTC | GrabCAD | TomdB | https://grabcad.com/ |
Miscellaneous
| Type | Manufacturer | Model | Host Site | Author/Creator | Link |
|---|---|---|---|---|---|
| Current Shunt | Tesla | P85 | GrabCAD | https://grabcad.com/library/1430339 | |
| Current Shunt | ISA | IVT-S 500 | GrabCAD | TomdB | https://grabcad.com/ |
| Current Shunt | ISA | IVT-S 1K | GrabCAD | TomdB | https://grabcad.com/ |
| Coolant Valve | Tesla | Model S/X 3way Valve | GrabCAD | TomdB | https://grabcad.com/ |
| Coolant Pump | BMW | 5 Series Pierburg | GrabCAD | TomdB | https://grabcad.com/ |
| Power steer pump | TRW | From Opel Astra | GrabCAD | J0hannes | Link |
| BMW i3 LIM | BMW | I3 | GrabCAD | Wim Boone | https://grabcad.com/ |
| HV DC Contactor | Tesla | Model 3/Y | GrabCAD | Wim Boone | https://grabcad.com/ |
| CCS Contactor | Tesla | Model 3/Y | GrabCAD | Wim Boone | https://grabcad.com/ |
| 12V Penthouse connector | Tesla | Model 3/Y | GrabCAD | Wim Boone | https://grabcad.com/ |
| Accelerator Pedal Cable Sensor | Honda | Element | GrabCAD | Matt Boyce | https://grabcad.com/ |
| Empty battery tray | Tesla | Model 3 | GrabCAD | Kaleb Reinhart | https://grabcad.com |
| BMS | Orion | 24 - 180 cell models | Orion | Orion | https://www.orionbms.com/ |
Requests
Please add your requests here for any CAD models or scans that you have been unable to find online or in the tables above. See example below:
Example request: Motor - Nissan - Leaf Gen 1 EM61 (without gearbox)
Motor - Lexus - GS300H
Engine compartment - BMW - E9x
Battery pack - BMW - PHEV
Note: If anyone is able to take a scan or source an existing model for a request, please add it to the tables above and remove the request from this section. Many thanks.