File:Tesla Model S Rear HVJB 20b.jpg: Difference between revisions

From openinverter.org wiki
Jump to navigation Jump to search
VisualWikitext
Asavage (talk | contribs)
429 edits
No edit summary
 
(No difference)

Latest revision as of 17:41, 23 March 2023

Tesla Model S GEN1 Rear HVJB "parking" connector for harness WWMA2, used in Single OBC installations only. Note (3) 180 ohm resistors, connected in parallel, to obtain net 60 ohms for HVIL loop.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:41, 23 March 2023Thumbnail for version as of 17:41, 23 March 20234,032 × 3,024 (1.39 MB)Asavage (talk | contribs)

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://openinverter.org/wiki/index.php?title=File:Tesla_Model_S_Rear_HVJB_20b.jpg&oldid=3603"