View source for Leaf stack with zombiverter

=== setting up a leaf stack with the zombiverter VCU ===
the full leaf stack ( motor/inverter, pdm (charger, dcdc, hvjb)) can be controlled with the zombieverter VCU

all you need is 12v and CANbus

== wiring ==

=== wiring the zombiverter to the leaf harness ===
the motor/inverter and PDM each use there own canbus

inverter to zombie wiring:
EV SYSTEM CAN-H (pin14)  to  CAN EXT H (pin 28)

EV SYSTEM CAN-L (pin15)   to  CAN EXT L (pin 27)


PDM to zombie wiring:


CAN H (ev system) pin 27 to CAN EXT 2 H

CAN L (ev system) pin 11  to CAN EXT 2 L



[[File:ZombieVerter VCU V1 cable side pinout2.jpg|thumb|zombiverter pinout|left|602x602px]]
[[File:Leaf inverter pinout.jpg|thumb|leaf inverter connector pinout|560x560px]]
[[File:PDM PINOUT.png|thumb|pinout of the pdm|716x716px]]
[[File:Leaf resolver pinout.png|thumb|em57 resolver pinout]]