Uploads by Marcexec
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 10:55, 11 June 2024 | MG ZS EV Charger.jpg (file) |  |
36 KB | 1 | |
| 11:45, 2 May 2023 | Mods to enable CAN bus done.jpg (file) |  |
4.02 MB | 1 | |
| 11:44, 2 May 2023 | Legs attached for pull test.jpg (file) |  |
3.33 MB | 1 | |
| 11:43, 2 May 2023 | 1k resistor bent for SMD.jpg (file) |  |
1.45 MB | 1 | |
| 11:42, 2 May 2023 | Jumpers soldered.jpg (file) |  |
6.34 MB | 1 | |
| 11:41, 2 May 2023 | Third hand holding jumpers and pins up.jpg (file) |  |
3.38 MB | 1 | |
| 11:40, 2 May 2023 | Pins and jumpers.jpg (file) |  |
2.48 MB | 1 | |
| 23:32, 18 April 2023 | Uno.jpg (file) |  |
35 KB | 1 | |
| 21:23, 18 April 2023 | 12V connected.jpg (file) |  |
919 KB | 1 | |
| 15:18, 17 April 2023 | Square and kerb a chopstick for pushing the crimped pins.jpg (file) |  |
6.21 MB | 1 | |
| 15:14, 17 April 2023 | Front view, note different numbering.jpg (file) |  |
6 MB | 1 | |
| 15:12, 17 April 2023 | Push the pins through.jpg (file) |  |
6.61 MB | 1 | |
| 14:37, 17 April 2023 | Perforate the seal with multimeter probe.jpg (file) |  |
6.65 MB | 1 | |
| 14:32, 17 April 2023 | Numbering scheme.jpg (file) |  |
5.88 MB | 1 | |
| 15:43, 14 April 2023 | Plastic grid removed, note different numbering.jpg (file) |  |
5.82 MB | 1 | |
| 15:37, 14 April 2023 | Soldered.jpg (file) |  |
4.4 MB | 1 | |
| 15:36, 14 April 2023 | Alternating.jpg (file) |  |
5.7 MB | 1 | |
| 15:35, 14 April 2023 | Connector Secured.jpg (file) |  |
2.69 MB | 1 | |
| 15:32, 14 April 2023 | Connector PCB screws.jpg (file) |  |
4.84 MB | 1 | |
| 10:49, 6 April 2023 | IPDM56 USB power up.jpg (file) |  |
1.51 MB | 1 |
