File:Coupler box section profile.jpg

Size of this preview: 800 × 533 pixels. Other resolution: 1,280 × 853 pixels.

Original file ‎(1,280 × 853 pixels, file size: 169 KB, MIME type: image/jpeg)

This covers the distance needed to avoid collision between inverter mount and transmission bell

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	21:06, 24 May 2020		1,280 × 853 (169 KB)	Johu (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	SONY
Camera model	DSC-RX100
Exposure time	1/100 sec (0.01)
F Number	f/1.8
ISO speed rating	250
Date and time of data generation	19:21, 6 May 2019
Lens focal length	10.4 mm
Width	1,280 px
Height	853 px
Orientation	Normal
Horizontal resolution	350 dpi
Vertical resolution	350 dpi
Software used	DSC-RX100 v1.10
File change date and time	19:21, 6 May 2019
Y and C positioning	Co-sited
Exposure Program	Normal program
Exif version	2.3
Date and time of digitizing	19:21, 6 May 2019
Meaning of each component	Y Cb Cr does not exist
Image compression mode	2
APEX brightness	2.6109375
APEX exposure bias	0
Maximum land aperture	1.6953125 APEX (f/1.8)
Metering mode	Pattern
Light source	Unknown
Flash	Flash did not fire, compulsory flash suppression
Supported Flashpix version	1
Color space	sRGB
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	28 mm
Scene capture type	Standard
Contrast	Normal
Saturation	Normal
Sharpness	Normal