Which board is better to use?

[Taichi]

Hello. I have a task to create an electric buggy. I want to use the native battery and inverter from the nissan leaf 1 gen. I need a slow charging function from the native connector and about 50 kW of power on the engine. Which of the boards can use these functions? Please do not be angry, I am new to this forum and I use a translator to communicate with you. Thank you

[LRBen]

Zombieverter board will work for that just fine. Plenty of documentation on here and the wiki as well for running a leaf setup.

[maiks]

Zombieverter board will work for that just fine. Plenty of documentation on here and the wiki as well for running a leaf setup.

get more details about Zombieverter here viewtopic.php?t=4934

[Bratitude]

There is no controller available that will run the gen 1 Lea on board charger.

The zombiverter will run the gen1 leaf motor+inverter
And dose CHAdeMO

but dose not run the gen1 leaf charger

[tom91]

The zombiverter will run the gen1 leaf motor+inverter
but dose not run the gen1 leaf charge

Where you getting this info from? I do not believe this to be the case.

[Jacobsmess]

Where you getting this info from? I do not believe this to be the case.

I vaguely remember one of Damiens videos on the stack mentioning something along the lines of this. May well be legacy information.

[Ruudi S]

Here is info on what it is controlling and what not https://openinverter.org/wiki/ZombieVer ... gers/DCDCs:

And there it says:
Chargers/DCDCs:
Nissan Leaf PDM (Charger and DCDC) Gen1,2 & 3

I have not tested myself yet but I am going to, maybe even this year!