Search found 5834 matches
- Mon May 13, 2024 8:08 pm
- Forum: Events and Meetups
- Topic: Formula E Berlin
- Replies: 4
- Views: 227
Re: Formula E Berlin
Interesting, thanks
- Mon May 13, 2024 7:08 pm
- Forum: Events and Meetups
- Topic: Formula E Berlin
- Replies: 4
- Views: 227
Formula E Berlin
Actually this post comes a little late as the event is already over ;) On last years e-cannonball we won tickets to Formula E in Berlin. https://youtu.be/Uo5HlnGj0Hk https://www.youtube.com/watch?v=EKYxVAolPww I was super amazed when I learned that they complete 41 laps at full race speed with just ...
- Mon May 13, 2024 10:54 am
- Forum: Chevy/Opel/Vauxhall/PSA
- Topic: Volt Contactor Amp Draw
- Replies: 3
- Views: 3910
Re: Volt Contactor Amp Draw
I have clarified this sentence in the wiki. Putting two contactors in series doesn't double their current capability and I'm sure it's not what arber meant to say. They need to be paralleled for double current capability
https://openinverter.org/wiki/Panasonic ... _Contactor
https://openinverter.org/wiki/Panasonic ... _Contactor
- Mon May 13, 2024 4:07 am
- Forum: Classifieds
- Topic: FS: Nissan Leaf 40 kWh battery
- Replies: 3
- Views: 887
Re: FS: Nissan Leaf 40 kWh battery
Decided to put these back up for sale as the second A2 project has question marks on it
- Sun May 12, 2024 9:43 am
- Forum: Inverters / Motor Controllers
- Topic: Am I to dumb for Open Inverter
- Replies: 26
- Views: 2256
Re: Am I to dumb for Open Inverter
Leave out all the contactor stuff for now and connect the battery directly to have less room for errors.
FOC itself doesn't care about the voltage but udcsw and udcmin should be set to 0 for the first tests
FOC itself doesn't care about the voltage but udcsw and udcmin should be set to 0 for the first tests
- Sat May 11, 2024 9:18 pm
- Forum: Charging
- Topic: Develop a QCA7000 board?
- Replies: 575
- Views: 8398308
Re: Develop a QCA7000 board?
Nice, so will this work with all chargers out there, even old ones?
- Sat May 11, 2024 3:35 pm
- Forum: Charging
- Topic: First-Time Config of FOCCI And CCS1 vehicle charging
- Replies: 63
- Views: 2661
Re: First-Time Config of FOCCI And CCS1 vehicle charging
Yes, that would require much more RAM text data bss dec hex filename 683952 2112 154504 840568 cd378 stm32_ccs Solution would be either try to butcher some redundant stuff or bigger MCU like https://www.digikey.de/de/products/detail/stmicroelectronics/STM32U575RIT6Q/18085716 or https://jlcpcb.com/pa...
- Fri May 10, 2024 5:59 pm
- Forum: Charging
- Topic: First-Time Config of FOCCI And CCS1 vehicle charging
- Replies: 63
- Views: 2661
Re: First-Time Config of FOCCI And CCS1 vehicle charging
For Precharge TargetVoltage isn't used but BatteryVoltage. Is that mapped correctly?
- Fri May 10, 2024 5:57 pm
- Forum: General
- Topic: Big-Endian CAN mapping
- Replies: 2
- Views: 375
Re: Big-Endian CAN mapping
Hmm, the bit order shouldn't be changed at all, just the byte order: word = (bptr[0] << 24) | (bptr[1] << 16) | (bptr[2] << 8) | bptr[3]; I think it should be consistent with SavvyCAN that the position now specifies the "end" of the data item. So little endian bit 0, length 16 becomes big ...
- Fri May 10, 2024 2:53 pm
- Forum: User Interface
- Topic: Save parameters to flash returns ok but params not stored.
- Replies: 4
- Views: 421
Re: Save parameters to flash returns ok but params not stored.
Forgot the obvious: when the inverter is in Run mode it won't save (because it interrupts the control loop). It must be in stop mode. The CAN Ui doesn't report this yet...
- Thu May 09, 2024 9:48 pm
- Forum: Classifieds
- Topic: FS: Nissan CHAdeMO port and CHAdeMO plug EVSE side - price lowered!
- Replies: 8
- Views: 943
Re: FS: Nissan CHAdeMO port and CHAdeMO plug EVSE side - price lowered!
Hmm, not sure. It's the Nissan cable 296B1-3NF1A
I assume 35mm² or 50mm². I can only measure cable diameter. Used to charge at 180A on Aral Pulse
I assume 35mm² or 50mm². I can only measure cable diameter. Used to charge at 180A on Aral Pulse
- Wed May 08, 2024 6:22 pm
- Forum: Vehicle Control (VCU)
- Topic: Zombieverter looses WiFi connection when trying to update
- Replies: 5
- Views: 297
Re: Zombieverter looses WiFi connection when trying to update
The latest web ui hides SWD update as it only works with additional connections. And even then it never really worked for me
UART may fail but in that case you can power cycle and retry
UART may fail but in that case you can power cycle and retry
- Wed May 08, 2024 7:48 am
- Forum: User Interface
- Topic: Update via wifi fails
- Replies: 32
- Views: 10945
Re: Update via wifi fails
Indeed the bin files don't really need to be kept. When uploading a new one all existing ones could be deleted. The javascript fix has the advantage for now that the module doesn't need to be upgraded with special tools but just by uploading the .js file Next issue is possibly the json files that ar...
- Tue May 07, 2024 9:26 pm
- Forum: Charging
- Topic: First-Time Config of FOCCI And CCS1 vehicle charging
- Replies: 63
- Views: 2661
Re: First-Time Config of FOCCI And CCS1 vehicle charging
I think the 5% PWM should start as soon as the charger is powered and you have 2k7 pull-down to PE (not PP). When you say "PP" do you mean "PE" i.e. Earth? Doesn't really make much sense to measure between CP and PP
- Tue May 07, 2024 9:24 pm
- Forum: Nissan
- Topic: Nissan Leaf Gen3 Drop-in board
- Replies: 41
- Views: 3276
Re: Nissan Leaf Gen3 Drop-in board
Maybe I get a chance to test with Zoe motor
- Tue May 07, 2024 12:29 pm
- Forum: Getting Started
- Topic: where to pass TUV in Germany
- Replies: 40
- Views: 12325
Re: where to pass TUV in Germany
The last time I went was with Audi A2. But that was first registered in 2001 so before that threshold date. Anyway, Touran is from 2004 and back then I emailed Klaus Baumeister of TÜV Nord (unfortunately he is retired now) ... Nun möchte ich wieder einen Umbau machen, diesmal jedoch mit Serienkompon...
- Tue May 07, 2024 8:05 am
- Forum: Projects
- Topic: [DRIVING] VX220 with Tesla SDU
- Replies: 143
- Views: 19437
Re: [DRIVING] VX220 with Tesla SDU
With firmware 5.27.R you can freely map "regenpreset" to CAN. It is 0-100% * offthrotregen
- Tue May 07, 2024 7:10 am
- Forum: Toyota/Lexus
- Topic: Unwanted "over current" messages Prius20
- Replies: 7
- Views: 529
Re: Unwanted "over current" messages Prius20
Wait, I had this yesterday also. Can you put the latest firmware on the ESP module
https://github.com/jsphuebner/esp8266-web-interface
https://github.com/jsphuebner/esp8266-web-interface
- Mon May 06, 2024 7:27 pm
- Forum: General
- Topic: Improve documentation with help of AI
- Replies: 4
- Views: 281
Re: Improve documentation with help of AI
Exciting!
What options do we have? Is there AI that generates formatted output, maybe even draws diagrams that we can put directly into the wiki?
What options do we have? Is there AI that generates formatted output, maybe even draws diagrams that we can put directly into the wiki?
- Mon May 06, 2024 6:38 pm
- Forum: User Interface
- Topic: Update via wifi fails
- Replies: 32
- Views: 10945
Re: Update via wifi fails
Finally put Janosches fix in place
https://github.com/jsphuebner/esp8266-w ... 47da6fa7c5
https://github.com/jsphuebner/esp8266-w ... 47da6fa7c5
- Mon May 06, 2024 7:14 am
- Forum: Tesla
- Topic: Using iBooster Brake Pressure Sensor with LDU Board
- Replies: 2
- Views: 238
Re: Using iBooster Brake Pressure Sensor with LDU Board
I suppose the iBooster also communicates pedal travel via CAN?
Then you can map that to "regenpreset" when using 5.27.R firmware
There is also a secondary throttle input that can be used as regenpreset source
Then you can map that to "regenpreset" when using 5.27.R firmware
There is also a secondary throttle input that can be used as regenpreset source
- Mon May 06, 2024 5:37 am
- Forum: Nissan
- Topic: Nissan Leaf Gen3 Drop-in board
- Replies: 41
- Views: 3276
Re: Nissan Leaf Gen3 Drop-in board
Maybe add resolver to pinswap?
- Sun May 05, 2024 5:41 pm
- Forum: Projects
- Topic: 2008 Corvette C6 Conversion
- Replies: 10
- Views: 4229
Re: 2008 Corvette C6 Conversion
Yes like a valave it tapers down
- Sat May 04, 2024 7:26 pm
- Forum: Classifieds
- Topic: WtB: DFSK/MG 3-phase Charger
- Replies: 13
- Views: 1576
Re: WtB: DFSK/MG 3-phase Charger
It was found here: http://www.bildelsbasen.se/
I payed roundabout 500€ delivered from Sweden
Now I'm searching for the plugs which turns out harder than I thought.
Part numbers HVC5P63FSX06 (input) and HVC2P28FSX04 (output)
I payed roundabout 500€ delivered from Sweden
Now I'm searching for the plugs which turns out harder than I thought.
Part numbers HVC5P63FSX06 (input) and HVC2P28FSX04 (output)
- Fri May 03, 2024 6:13 pm
- Forum: Classifieds
- Topic: FS: Nissan CHAdeMO port and CHAdeMO plug EVSE side - price lowered!
- Replies: 8
- Views: 943
Re: FS: Nissan CHAdeMO port and CHAdeMO plug EVSE side - price lowered!
Lowered price to 70€