CAN table CAN STD

The Status cell will have several status like:

• Suggested,
• Approved, looks good go ahead and put in firmware
• STD, is established and standard in firmware

Openiverter CAN data out.

Function	CAN-Id	Byte0	Byte1	Byte2	Byte3	Byte4	Byte5	Byte6	Byte7	Description	Status
DIR	0x123	123	123	123	123	123	123	123	123		test
FWD	0x123	123									test
REW	0x123		123
P/N	0x123			123

Simp BMS CAN data out.

Function	CAN-Id			Description
Pack Volt	123	123	123