Chademo With Arduino Due

From openinverter.org wiki

Revision as of 22:13, 21 August 2022 by Crasbe (talk | contribs) (Added categories to the page to allow for better navigation)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Here's an outline for how I added Chademo to my Beetle conversion, other controllers my differ. The Due and shield board can be substituted with the Leaf VCU from EVBMW

Required Parts

Arduino Due
Shield Board (https://oshwlab.com/jamie84.jj/duechademo)
Isabellenhutte IVT or IVT-S shunt
2x contactors
Chademo port
Relay
Firmware

Connections

Wire up the socket as per the diagram below.

Chademo Wiring.png

CHAdeMO-LeafVCU (1).png

Retrieved from "https://openinverter.org/wiki/index.php?title=Chademo_With_Arduino_Due&oldid=2704"