Schematics and connector pinout

From openinverter.org wiki
Revision as of 21:14, 23 December 2019 by Joromy (talk | contribs)
Jump to navigation Jump to search

joromy_tim_w_GND_fill_15b - Schematic.pdf

TIM connector C4998
Name (New TIM) Circuit (Old TIM) Function (New TIM)
1 NC NC
2 MTMP- 3708 (BN) Motor Temp sensor Motor Temp sensor Input -
3 DIS_DRV 3404 (YE) Chg cord plugged in
4 USART_TX 3017 (DG/WH) SIADIS RXD
5 CAN_H 914 (TN/OG) J1850 bus plus
6 STOP_RLY 3235 (YE/LG) Stop lamp RLY
7 VSS_OUT 679 (GY/BK) Vehicle speed signal
8 SIG_MAIN_C 3986 (DG) Main contactor
9 12V_ALL_T 276 (BN) Power hot all time
10 12V_RUN_START 640 (RD/YE) Power run/start
11 MTMP+ 3757 (BK/WH) Motor Temp sensor
12 NC NC
13 3.3V_USART 3018 (WH) SIADIS d/l
14 USART_RX 3016 (LG/BK) SIADIS TXD
15 CAN_L 915 (PK/LB) J1850 bus minus
16 NC NC
17 NC NC
18 PRECHG_RLY
19 12V_ALL_T
20 12V_RUN_START
21 NC
22 NC
23 GND_USART
24 NC
25 NC
26 SIG_VSS_B
27 NC
28 NC
29 GND
30 5V_VSS
31 CH_GND
32 NC
33 NC
34 NC
35 EMCY_PWR
36 SIG_VSS_A
37 OIL_P_RLY
38 NC
39 GND
40 GND_VSS