MG 4 Gear Selector: Difference between revisions
Jump to navigation
Jump to search
Created page with " ==General Information== MG 4 uses a rotary gear selector. Drive, Reverse and Neutral are selected by rotating the gear knob. Park is selected by pressing the gear knob. Gear selection is communicated by CAN. === Part Numbers === SAIC Motor Shift-by-wire : 11357121 ===Pinout and Connector=== The shifter uses a 12 way connector, of which only 5 pins are connected. Required plug is: Molex 347290122 : https://www.molex.com/en-us/products/part-detail/0347290122 When vie..." |
(No difference)
|
Revision as of 14:41, 15 August 2025
General Information
MG 4 uses a rotary gear selector. Drive, Reverse and Neutral are selected by rotating the gear knob. Park is selected by pressing the gear knob. Gear selection is communicated by CAN.
Part Numbers
SAIC Motor Shift-by-wire : 11357121
Pinout and Connector
The shifter uses a 12 way connector, of which only 5 pins are connected. Required plug is:
Molex 347290122 : https://www.molex.com/en-us/products/part-detail/0347290122
When viewed from the rear of the unit, Pin1 is top-left, Pin12 is bottom right.
| Pin | OEM Wire Colour | Function |
|---|---|---|
| 1 | Black/Yellow | 12V |
| 5 | Pink/White | 12V WakeupEnable |
| 7 | Yellow/Blue | PT-CAN Ext High |
| 8 | Green/Yellow | PT-CAN Ext Low |
| 12 | Black | GND |
CAN Bus
The Powertrain CAN Bus has a baud rate of 500kBaud.