Introduction CAN STD

This is an attempt to get all openinverter hardware to follow a standard on their CAN bus communication. Since there is priority in the CAN bus data, it's important to have a standard.

The goal for this CAN table, is also to have a central computer/microcontroller with CAN (several CAN), wifi (ESP), maybe a display. Then all CAN based modules can be monitored/configured, from one ESP web server or display.

So I am encouraging all openiverter engineers to include CAN configuration and CAN messages in their design. If not we end up in having a lot of wifi modules and terminals programs scattered all over......

Products:

• Openinverter
• Simp BMS
• Tesla Charger (only with CAN)
• Isolation monitor
• CAN display
• HV voltage sensor/current sensor
• Misc button, gear shift, menu selector, joystick
• Brake and accelerator