Peugeot Throttle Sensor

From openinverter.org wiki
Revision as of 11:36, 4 December 2023 by Crasbe (talk | contribs) (Added the Accessories Category similar to other Throttle pages)
Jump to navigation Jump to search

Discussed here: https://openinverter.org/forum/viewtopic.php?p=61795#p61795

And here: https://openinverter.org/forum/viewtopic.php?p=8300&hilit=9643365680#p8300 and here: https://openinverter.org/forum/viewtopic.php?p=64362#p64362

A cheap option for cable driven throttle control is 9643365680. It's used on French cars (Peugeot 306 HDI and others).


Pinot is as below

This was tested now by Tomdb/tom91, with results:

4 - Gnd

3 - 5V

2 - Sig 2 requires pull up to 5V

1 - Sig 1 requires pull up to 5V

The value of the Pullup resistors is 1kOhm.


Testing by clanger9 shows

"Rather than a true potentiometer throttle, it appears these use a contactless sensor to output a pair of analogue signals.

Using a 5V supply and a 1kΩ pull-up resistor, I got the following readings:

0% throttle white: 0.419V yellow: 0.209V

100% throttle white: 3.780V yellow: 1.871V"

Peugeot TPS pinout.jpg
Retrieved from "https://openinverter.org/wiki/index.php?title=Peugeot_Throttle_Sensor&oldid=4269"