Peugeot Throttle Sensor

From openinverter.org wiki
Revision as of 11:10, 4 December 2023 by Uhi22 (talk | contribs) (added cathegories)
Jump to navigation Jump to search

Discussed here: https://openinverter.org/forum/viewtopic.php?p=61795#p61795

One very cheap cable driven throttle sensor is 9643365680. It's used on French cars. I don't know the pinout, but it seems to be a 4 pin sensor so not too difficult to test and find out using a current limited power supply. I would be very surprised if it didn't provide simple analog signals when supplied 5V, like almost all of them do.

This was tested now by Tomdb/tom91, with results:

4 - Gnd

3 - 5V

2 - Sig 2 requires pull up to 5V

1 - Sig 1 requires pull up to 5V

The value of the Pullup resistors is 1kOhm.