prius gen 3 inverter
cant find a deffinate answer .. seen daimens foc tuning guide for gen 2 suggests pinswap 5.. would this be the same for the gen 3?
tried with manualid = 1 and everything got very hot very quickly.
prius gen 3 inverter pinswap
-
stuart1977
- Posts: 7
- Joined: Mon Nov 04, 2024 8:58 pm
Re: prius gen 3 inverter pinswap
The wiki says set Gen 3 to pinswap to "PWMOUTPUT23" (type set pinswap 8 )
https://openinverter.org/wiki/Toyota_Prius_Gen3_Board
There is a table down near the middle of the page called "Inverter Parameters"
This video says toyota uses this for Gen 2 and Gen 3 (Johannes begins explaining at 56:55)
https://youtu.be/tirDQJ6iH28?si=M6U4fsR6aOERoWgY&t=3415
https://openinverter.org/wiki/Toyota_Prius_Gen3_Board
There is a table down near the middle of the page called "Inverter Parameters"
This video says toyota uses this for Gen 2 and Gen 3 (Johannes begins explaining at 56:55)
https://youtu.be/tirDQJ6iH28?si=M6U4fsR6aOERoWgY&t=3415