OEM BMS modules which allow to be used in EV conversion

[arber333]

I would like to make quickly accessible database for which BMS modules can be used in conversions.
Please feel free to post with references and specifications. I will add this to oroginal post for better accessibility.

I identified next BMS sensors:

1. Chevrolet Volt Gen1 / Opel Ampera BMS
https://leafdriveblog.wordpress.com/202 ... mpera-bms/
viewtopic.php?p=25956&hilit=BMS#p25956
https://leafdriveblog.wordpress.com/202 ... mpera-bms/

2. Chevrolet Volt Gen2 BMS
viewtopic.php?p=16674#p16674
https://www.diyelectriccar.com/threads/ ... ry.204283/
https://www.diyelectriccar.com/threads/ ... st-1098937
https://www.diyelectriccar.com/threads/ ... rs.208522/

3. VW Passat GTE battery slave modules
https://leafdriveblog.wordpress.com/202 ... o-simpbms/
https://openinverter.org/wiki/VW_Hybrid_Battery_Packs

4. VW EGolf Battery slave modules
https://openinverter.org/wiki/VW_EGolf_Battery
viewtopic.php?p=25058#p25058

5. Nissan Leaf BMS
viewtopic.php?t=370
https://openinverter.org/wiki/Nissan_Leaf_BMS

6. ZEVA BMS system going open source
viewtopic.php?t=1928&hilit=ZEVA

[Bigpie]

Renault Kangoo BMS will be in the next Zombie release

[haand]

Check this page out for info about VW e-Golf BMS interface:
https://openinverter.org/wiki/VW_EGolf_Battery

[arber333]

Check this page out for info about VW e-Golf BMS interface:
https://openinverter.org/wiki/VW_EGolf_Battery

Err...

[Tachopis]

I will stay around as this is my next topic in the conversion. I was considering VW MEB modules and using simp, but also good idea to find a BMS controlling modules directly.