Will update this 1st post along my progress on the build.
Some 3d modeling/rendering is in the works and I have started to print out a full scale M3RDU for mockup whike I continue designing my future EV to be.
This thread will follow more parts printed then it will become reality
Grey filament arrived today
![Image](https://i.ibb.co/BPZPLn5/20230112-191713.jpg)
![Image](https://i.ibb.co/X7mVMmw/20230112-191610.jpg)
First part in black after dusting off the printer from storage I took a chance that the old dusty pla would work and it did print just fine
![Smile :)](./images/smilies/icon_e_smile.png)
![Image](https://i.ibb.co/vP3dx9L/20230112-191406.jpg)
Second part in progress
![Image](https://i.ibb.co/1rDqjpg/20230112-191309.jpg)
Long progress...
![Image](https://i.ibb.co/p1X62vy/20230112-191255.jpg)