Make Nissan Leaf Gen3 adapter board

Create a thread for each item that needs working on by the community
Post Reply
User avatar
johu
Site Admin
Posts: 3864
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Contact:

Make Nissan Leaf Gen3 adapter board

Post by johu »

I would like to have an adapter board for Gen3 inverters based on mini mainboard: https://openinverter.org/wiki/Mini_Mainboard

Currently I can't find the time to work on it myself, so was wondering if someone likes to give it a shot? Ideally this would be done in KiCAD.

I have written to Kelju whether I can publish his prior work, if so, I will post it here.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
User avatar
johu
Site Admin
Posts: 3864
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Contact:

Re: Make Nissan Leaf Gen3 adapter board

Post by johu »

Attached is schematic from adapter board. There are some mistakes on it, will comment on the corrections later
Attachments
Leaf_Gen3_Adapter_A11.pdf
(25.27 KiB) Downloaded 75 times
20201112 NISSAN LEAF 2018 INVERTER CONTROL PINOUT.pdf
(86.49 KiB) Downloaded 68 times
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
User avatar
Mouse
Posts: 133
Joined: Wed Sep 25, 2019 8:17 am
Location: Wales
Contact:

Re: Make Nissan Leaf Gen3 adapter board

Post by Mouse »

Hi,
I use Kicad and an adapter board shouldn't be that taxing.
Also a good opportunity to give something back to the project.

I can send / post up photos of past work if needed.
SRFirefox
Posts: 28
Joined: Thu Jun 25, 2020 2:28 am

Re: Make Nissan Leaf Gen3 adapter board

Post by SRFirefox »

Do you have dimensions for connector and mounting placement? Or a Gen3 mainboard for reference. I'd be happy to do the layout for this board as well.
Post Reply