I have tesla 3 US spec with 1phase 11kW (48A charger) + mobile connector 32A + phoenix contact 22kW 3phase 32A type2-type2 cable

I tested it on different spots

1, FREE public charging point 22kW - as it was free, city limited current to 6A - which means 1phase car will charge with 1,5kW only
So I ...

every aliexpress listing with low price is not true/scam, DC CCS2 charger cost me about 1700USD with slower sea shipping (which takes about 4months to EU) and I ordered direclty from factory, i heard aliexpress has even 30-40% fees/commision + for sure transaction will be tracked so this means ...

I installed power meter today


tesla 3 LR 2018

I charged it from 20 to 72%

from grid 34,95kWh
tesla app report 32kWh
scanmytesla report 31,1kWh

I set current limit on charger at 40A

Very interesting.. now if I could find something to go the other way as my conversion will likely be AC only (sub 200 volt). :-)

charger module range is 150-750V, maybe minimum is 150V but I dont know, if you really want to know I can check it for you

what voltage and capacity of battery you ...

I wanted to do it but for cheap and this was possible using chademo - without switching to 288V
BUT:
1. yes, chademo starts from 45 or 50V but only on older chargers, newer chargers has new modules which starts from 150-200VDC so it will not work
2. device with contactors and controller will have ...

https://i.ibb.co/pBGTmqyW/IMG-3653-2.jpg

https://i.ibb.co/YF75MZ0t/IMG-3368-3.jpg

https://i.ibb.co/5Xdzc0bk/IMG-3380.jpg

SPECS:
curretnt: 50A DC max
voltage range : 200-750VDC
input: 380V 3phase (CEE 32A or type2 from wallbox) LCD power up on 1phase but will not charge vehicle
dimensions ...

I have 2 unusuall vehicles
emotorcycles:

- energica ss9+ 2020 it has 80S battery (range 250-336VDC)
- harley livewire 2020 it has 70S battery (range 230-294VDC)

I have 20kW DC charger but I am willing to test 7kW if you have one - it is only 1 phase or posible to make it 3phase?

750euro
I dont know about gen

still looking ?

for how much did you bought advantics controller? I sent email to them but no reply

I own stiga e-ride C300 model (lowest model)

line up
c300 (384e) has basic panel
c500 (584e) + eco mode + cruise control buttons + more leds + bluettooth
798e - lcd top end controll panel + bluetooth + electrical actuators to control deck height and grass basket controll



recently I found full ...

any update?
1093219-10-G

3PH or 1PH?

I can get huawei R100020G1 rectifier for cheap, is there possibility to make controller for diy ccs2 charging?

are there any bi directional CCS charger on the market right now? and which cars support it?

I am thinking about to get one or two modules
EVR500-15000C 15KW

is there any place to get controller for that?
my goals is the same as in main post - get external ccs charger powered by 3phase 400V

Kevin Sharpe wrote: ↑Mon Sep 07, 2020 6:58 pm

szczur333 wrote: ↑Mon Sep 07, 2020 6:36 pm I have simple ebike with 72(84V) battery and want to charge it via chademo by 30-50A

Many CHAdeMO chargers do not support batteries below ~200V

I know, but we have new chargers here, and some guy - charge 52V battery pack without problem

is it possible to use this if i have bms without can?
I have simple ebike with 72(84V) battery and want to charge it via chademo by 30-50A