Just wondering what DC/DC conveter is used on the voltage sensor. I can't find it on the schematic or any web pages.
Thanks
Jonathan
DC/DC Converter on Voltage Sensor
-
- Posts: 656
- Joined: Sat Oct 05, 2019 6:50 pm
- Location: Northern California, USA
- Been thanked: 1 time
- Contact:
Re: DC/DC Converter on Voltage Sensor
Hi,
The Rev2 kit uses the RKE-0505S/H according to the BOM I received with my kit from Johannes.
You're referring to this board, correct? https://openinverter.org/wiki/Sense_Boards
The Rev2 kit uses the RKE-0505S/H according to the BOM I received with my kit from Johannes.
You're referring to this board, correct? https://openinverter.org/wiki/Sense_Boards
-
- Posts: 3265
- Joined: Mon Dec 24, 2018 1:37 pm
- Location: Slovenia
- Has thanked: 80 times
- Been thanked: 234 times
- Contact:
Re: DC/DC Converter on Voltage Sensor
Hi in my experience i would recommend Murata NME0505SC since this DCDC can spend infinite time shorted. Just in case...
Re: DC/DC Converter on Voltage Sensor
Good to know.... I usually look into alternatives when I look at a design