I want to control a PTC heater over LIN (see https://openinverter.org/wiki/Webasto_HVH50
and viewtopic.php?t=1565 )
I have found a simple to build controller based on an Arduino (see https://ev-olution.yolasite.com/nissan- ... roller.php )
As I am not a programmer and I do not have time to learn what it would take to program this, I would like to build this and send it to someone who will program it for me.
If anybody in N. A. is up for helping me out with this please message me.
Thanks!
Wanted: Arduino programmed in North America
-
catphish
- Posts: 955
- Joined: Fri Oct 08, 2021 11:02 pm
- Location: Dorset, UK
- Has thanked: 94 times
- Been thanked: 179 times
Re: Wanted: Arduino programmed in North America
If I'm understanding correctly, the program already exists.
I know you said you don't have much time, but I'd say loading an existing program onto an Arduino is extremely easy. I would strongly suggest that you at least try. The page you linked provides a program that will do this.
I know you said you don't have much time, but I'd say loading an existing program onto an Arduino is extremely easy. I would strongly suggest that you at least try. The page you linked provides a program that will do this.
Re: Wanted: Arduino programmed in North America
I know, you are right... just a bit swamped with "one more thing" ism.
I will view some Arduino programming videos tonight
I will view some Arduino programming videos tonight