Cannot access web interface on New Tesla LDU V6 Board
-
- Posts: 3
- Joined: Sat Sep 16, 2023 7:17 pm
Cannot access web interface on New Tesla LDU V6 Board
Hi, Been trying to fix this for days now and simply cannot figure this out. I am trying to program a new V6 board with the ESP32 Wi-Fi chip. I downloaded jsphuebner's esp32-web-interface from the github repository and followed instructions to flash via platformIO. Code builds & Uploads properly to the ESP32 Module through my serial adapter. However, when I power the board with 12v supply the ESP32 Module turns on and shows a network that I can connect to. I connect to it and try to access the web interface via https://192.168.4.1 and it simply won't open up the web interface. Only the power LED is displaying on board and the health LED is not flashing. I am pretty sure I am just missing something obvious here but for some reason cannot figure it out. Any help would be much appreciated, Thx.
- johu
- Site Admin
- Posts: 5791
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1023 times
- Contact:
Re: Cannot access web interface on New Tesla LDU V6 Board
Not https
Have you programmed the stm32 as well?
Have you programmed the stm32 as well?
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
-
- Posts: 3
- Joined: Sat Sep 16, 2023 7:17 pm
-
- Posts: 3
- Joined: Sat Sep 16, 2023 7:17 pm
Re: Cannot access web interface on New Tesla LDU V6 Board
Is there a guide on how to program stm32 & esp32 on the V6 Tesla LDU Board?
- johu
- Site Admin
- Posts: 5791
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1023 times
- Contact:
Re: Cannot access web interface on New Tesla LDU V6 Board
viewtopic.php?t=6
I see some issues with the current state of esp32-web-interface. The version on my github is for CAN communication only, i.e. it won't work on a board. The version that does work was on Pete8008s github but he's deleted it. What a mess. Will try to fix this now.
I see some issues with the current state of esp32-web-interface. The version on my github is for CAN communication only, i.e. it won't work on a board. The version that does work was on Pete8008s github but he's deleted it. What a mess. Will try to fix this now.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
- johu
- Site Admin
- Posts: 5791
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1023 times
- Contact:
Re: Cannot access web interface on New Tesla LDU V6 Board
Alright, now I have added the UART backend to my github as well: https://github.com/jsphuebner/esp32-web-interface
Read the readme file for programming instructions.
Read the readme file for programming instructions.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9