Aerobat wrote: ↑Wed Jan 15, 2025 6:18 pm
Hi Did anyone get these motors operational with the original controllers? I could really use some help on the can bus side
I have not gotten the motor operational with the original inverters, but am at a point where my makeshift VCU communicates with the inverter. All error states on the inverter are 0 (no errors), but it appears to be stuck in standby mode, and the voltage reading seems to be significantly off, (unless I'm reading the CAN wrong). I can maybe answer CAN questions you have, but I don't know how much help I'll be as my motor is also non-operational.
