There is a ton of content out there out there about both, but I haven't seen them in the same build. I guess I just want to make sure Zombieverter can do both CAN and SSI controlling at the same time.
I'm looking to do an ultra low budget EV conversion of a 2001 Lexus IS300. The GS450H transmission seems like the best option to maintain the front engine RWD automatic transmission character of the original car. And the Leaf is a platform I'm very familiar with as a low cost donor for the rest of the HV system.
Can Zombieverter be used to control a Leaf PDM and battery and a GS450H transmission in the same build? Topic is solved
-
Arizonajake
- Posts: 1
- Joined: Fri Apr 10, 2026 1:44 pm
- Has thanked: 1 time
-
tom91
- Posts: 2962
- Joined: Fri Mar 01, 2019 9:15 pm
- Location: Bicester, Oxfordshire
- Has thanked: 328 times
- Been thanked: 847 times
Re: Can Zombieverter be used to control a Leaf PDM and battery and a GS450H transmission in the same build?
yes you can. Nothing stopping you from doing it in hardware or software.