OpenInverter UI, One click install

[jetpax]

So long time readers will know I've been working on a new robotics platform, and finally have the software all packaged up, and one of the extensions I created it for first was OpenInverter

If you have an esp32s3 (or P4) lying around with a CAN interface, you can now install it with one click

If you are interested in other CAN bussy apps like Dalas Battery Emulator etc check out the Extensions hub where you can load others

Give it a go and let me know in the comments how you get on!

[tom91]

Would it be possible to set one up for the ESP32 (Wemos) serial interface used directly on OI boards?

[Bigpie]

I also would like to know how to add projects to this

[jetpax]

hopefully most of what you need to create any apps for the platform should be in

https://scriptostudio.com/docs/

[jetpax]

@tom91 IIRC I had some library install error compiling for esp32 and couldnt be bothered to fix it, as i consider them basically obsolete haha

S3 (and P4) are so much better, esp security wise

bear in mind the platform supports a lot more than just OI eg

https://pycoclaw.com

but will take a look