Does the OI gen 2 leaf board require the leaf PDM?

Nissan Leaf/e-NV200 drive stack topics
Post Reply
rob1772
Posts: 7
Joined: Mon Apr 05, 2021 9:10 pm
Has thanked: 1 time
Been thanked: 2 times

Does the OI gen 2 leaf board require the leaf PDM?

Post by rob1772 »

With my next conversion project, due to space/packaging arrangements I'll need to loose the PDM box that sits atop the leaf stack. I'll be using an Orion BMS and separate DCDC converter and charger. Will the OI gen 2 leaf board be able to function without the PDM?
I'm looking to use 2018 110kw stack.
Top
Zieg
Posts: 385
Joined: Mon Apr 25, 2022 3:31 am
Has thanked: 168 times
Been thanked: 160 times

Re: Does the OI gen 2 leaf board require the leaf PDM?

Post by Zieg »

Yup you'll be fine.
Top
User avatar
Bratitude
Posts: 1156
Joined: Thu Jan 02, 2020 7:35 pm
Location: Canada
Has thanked: 246 times
Been thanked: 469 times
Contact:
Contact Bratitude

Re: Does the OI gen 2 leaf board require the leaf PDM?

Post by Bratitude »

rob1772 wrote: ↑Sat Jul 26, 2025 8:43 pm With my next conversion project, due to space/packaging arrangements I'll need to loose the PDM box that sits atop the leaf stack. I'll be using an Orion BMS and separate DCDC converter and charger. Will the OI gen 2 leaf board be able to function without the PDM?
I'm looking to use 2018 110kw stack.
The OI board only effects the inverter and the pdm is not involved in anyway.

The 2018 110kw stack is a gen3 and the replacement board won’t work with it.

There is work being done (or was) on gen3 leaf inverter replacement boards, but they are not finished yet.

Right now canbus is the only method of control. Zombieverter will run it just fine
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
Top
rob1772
Posts: 7
Joined: Mon Apr 05, 2021 9:10 pm
Has thanked: 1 time
Been thanked: 2 times

Re: Does the OI gen 2 leaf board require the leaf PDM?

Post by rob1772 »

ah... I thought it was the 130kw that were gen3. So at present, is it true to say the OI board will only work with the 80kw inverters?

Will the Zombie run the 130kw inverter standalone? ie without the nissan PDM/charger/DCDC and rest of the leaf stuff?
Top
User avatar
tom91
Posts: 2962
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bicester, Oxfordshire
Has thanked: 330 times
Been thanked: 847 times

Re: Does the OI gen 2 leaf board require the leaf PDM?

Post by tom91 »

rob1772 wrote: ↑Mon Jul 28, 2025 7:17 pm Will the Zombie run the 130kw inverter standalone? ie without the nissan PDM/charger/DCDC and rest of the leaf stuff?
Yes it can.
Creator of SimpBMS
Founder Volt Influx https://www.voltinflux.com/
Webstore: https://citini.com/
Top
User avatar
Bratitude
Posts: 1156
Joined: Thu Jan 02, 2020 7:35 pm
Location: Canada
Has thanked: 246 times
Been thanked: 469 times
Contact:
Contact Bratitude

Re: Does the OI gen 2 leaf board require the leaf PDM?

Post by Bratitude »

rob1772 wrote: ↑Mon Jul 28, 2025 7:17 pm ah... I thought it was the 130kw that were gen3. So at present, is it true to say the OI board will only work with the 80kw inverters?

Will the Zombie run the 130kw inverter standalone? ie without the nissan PDM/charger/DCDC and rest of the leaf stuff?
130kw leaf inverter I don’t think exists, there’s a 80,110, and 160.

Zombieverter will run all of them over can (no pdm needed)

And the oi board only fits the 80kw inverter
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
Top
Zieg
Posts: 385
Joined: Mon Apr 25, 2022 3:31 am
Has thanked: 168 times
Been thanked: 160 times

Re: Does the OI gen 2 leaf board require the leaf PDM?

Post by Zieg »

Oops, missed the 110kw bit. You might have gotten the 130 figure from reading about people getting about that much from the 80kw inverter + OI board?
Top
Post Reply

Return to “Nissan”