Simp BMS

[Jiyar]

If you clone the repo, open it with VS Code and have PlatformIO installed, it pulls the required libraries and compiles successfully without any modifications. Just tested.

Thank you for quick response, I'll do that

[johnsongt350]

Hi I am having an issue getting my car to charge. I'm using the simp bms v2 and a simp charge. I have an elkon 6.6 charger. I have the charger wired behind contactors.
Please see the current settings on the dashboard. Let me know if you see anything I'm missing.

[tom91]

? post some more info on you issue.

[johnsongt350]

When I plug In the EVSE it indicates ready on the EVSE. Nothing happens, no fan, no charge. I have 12volts at the simp charge, good ground. All connections are secure. I have the proper resister in place as well. I was wondering if any of my parameters need to be adjusted in the photos above

[tom91]

This is not the SimpBMS but Vero-BMS I believe reach out directly to them. https://veroelectric.com/product/vero-bms-v2

[johnsongt350]

Ok thanks

[toshimin]

Hello
Has anyone run simp bms on lilygo T-CAN485 ESP32 segregator RS-485 ?
https://pl.aliexpress.com/item/10050036 ... pt=glo2pol

[tom91]

I’m working on a BMW G30 Gear Selector integration project using Teensy 4.0.

Go post in a relevant topic and not randomly in other topics.

[Bigpie]

Post moved to a new topic