Vectrix VX1 MotorController OpenSource/DIY

[prensel]

I finally decided to put some TLC to my next project which has been gathering dust for ..say about 3 or 4 years....
This project is focussing on making a drop-in replacement Vectrix VX1 motorcontroller using as many of the OEM controller parts or better/cheaper parts together with the OpenInverter board.
At least the MC backplate/coolerplate has to be used as this act as the mounting plate as well.
Since the VX1 is using mainly CANbus comms between the InstrumentControlModule and charger (can probably be left out when using the OpenInverter charger capabilities) this protocol has te be implemented as well.

[marcexec]

Love the Vectrix, nearly bought one of the few in Ireland. The motor has an encoder, correct?
Maybe the Honda IMA-based Lebowski is the right size and Roger (Kiwifiat) sells conversion boards for this inverters - I'm running one myself.
Not much CAN, though, but likely tuneable to the funny throttle the VX-1 has (regen on roll forward).

Edit: also see viewtopic.php?f=39&t=6198