Project demystification - make openinverter.org more accessible

Create a thread for each item that needs working on by the community
jrbe
Posts: 517
Joined: Mon Jul 03, 2023 3:17 pm
Location: CT, central shoreline, USA
Has thanked: 177 times
Been thanked: 153 times

Re: Project demystification - make openinverter.org more accessible

Post by jrbe »

Tom, I appreciate all the work you do and don't mean to add to your workload.

When you say you created an index, is this web backend or a visual?

I believe it would help to have a wik creation / editing guide to help others follow the flow of the Wiki. It's great that it's crowd sourced but also chaotic because it's crowd sourced. The current work you're doing might be enough of a template to follow to help avoid the chaos.
User avatar
johu
Site Admin
Posts: 6424
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 290 times
Been thanked: 1384 times
Contact:

Re: Project demystification - make openinverter.org more accessible

Post by johu »

This already looks good and sounds promising. I've done some of that along the way but not systematically
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
User avatar
tom91
Posts: 2076
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bristol
Has thanked: 177 times
Been thanked: 461 times

Re: Project demystification - make openinverter.org more accessible

Post by tom91 »

jrbe wrote: Fri Dec 20, 2024 2:21 pm When you say you created an index, is this web backend or a visual?
You click the link?
Founder Volt Influx https://www.voltinflux.com/
Webstore: https://citini.com/
User avatar
tom91
Posts: 2076
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bristol
Has thanked: 177 times
Been thanked: 461 times

Re: Project demystification - make openinverter.org more accessible

Post by tom91 »

So done the following:
oem before.png
Clean the category usage with the OEM category for example. This should only be used as a "filter" category to get to the OEM you are after or some general comments on the topic.
oemafter.png
Also created a Parts category where all sub functions can be housed. This way you can "browse" for info from the OEM or the part function.
parts.png
My intention would be if you have a page with info on a part and how to use it you ONLY have it linked to the OEM/Manufacturer's category NOT the "OEM" category. Then link it to the function group.

This allows a more dynamic linking of cross function group items, like waterpumps under HVAC and Thermal Management for example.
Founder Volt Influx https://www.voltinflux.com/
Webstore: https://citini.com/
User avatar
Bratitude
Posts: 910
Joined: Thu Jan 02, 2020 7:35 pm
Location: Canada
Has thanked: 126 times
Been thanked: 294 times
Contact:

Re: Project demystification - make openinverter.org more accessible

Post by Bratitude »

Spent the past few days revamping the zombiverter page. Lots of junk, out of date and repetitive sections.

https://openinverter.org/wiki/ZombieVerter_VCU

Broke off some into dedicated pages which will need clean up and work.

Such as the:
leaf-zombie page
Gs450h-zombie page
Openinverter-zombie page
Hardware build
software
programming
Etc


Still a lot of work todo, right now working on the cleaning up fundamental prams and settings
And just a general how-to

Adding in links is needed.


We don’t want to load the main page with too much detailed junk.


Embed videos, pictures, etc greatly appreciated
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
User avatar
Bratitude
Posts: 910
Joined: Thu Jan 02, 2020 7:35 pm
Location: Canada
Has thanked: 126 times
Been thanked: 294 times
Contact:

Re: Project demystification - make openinverter.org more accessible

Post by Bratitude »

started a LEAF PDM page, if you have info, please dump https://openinverter.org/wiki/Nissan_leaf_pdm
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
Post Reply