Is there an open source VCU for the Leaf?

Post Reply
Pagdog
Posts: 3
Joined: Wed May 29, 2024 7:52 pm

Is there an open source VCU for the Leaf?

Post by Pagdog »

It seems the only options are commercial projects at several hundred dollars. Am I missing the open source projects?
Top
royhen99
Posts: 251
Joined: Sun Feb 20, 2022 4:23 am
Location: N. Wiltshire. UK
Has thanked: 21 times
Been thanked: 122 times

Re: Is there an open source VCU for the Leaf?

Post by royhen99 »

https://openinverter.org/wiki/ZombieVerter_VCU
Top
User avatar
catphish
Posts: 959
Joined: Fri Oct 08, 2021 11:02 pm
Location: Dorset, UK
Has thanked: 96 times
Been thanked: 187 times

Re: Is there an open source VCU for the Leaf?

Post by catphish »

As royhen99 says, the open source VCU you are looking for is ZombieVerter. This works great with Leaf hardware as well as some others.
Top
Alibro
Posts: 927
Joined: Sun Feb 23, 2020 9:24 am
Location: Northern Ireland
Has thanked: 331 times
Been thanked: 197 times
Contact:
Contact Alibro

Re: Is there an open source VCU for the Leaf?

Post by Alibro »

If you want to do it really cheap then use an Arduino Due with Damiens Nissan Leaf code but if several hundred dollars for the VCU is an issue then you're probably in the wrong place.
Top
Post Reply

Return to “Vehicle Control (VCU)”