It looks like since I stopped maintaining said firmware no one ever picked up on it. Janosch did some refactoring and added tests.
It could use a libopeninv upgrade to latest to support the Wifi/CAN dongle to give one example.
So who here uses a Tesla charger and thinks they are up to the task?
https://github.com/jsphuebner/stm32-teslacharger
Maintain Tesla Gen2/3 OBC firmware
-
johu
- Site Admin
- Posts: 6716
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 369 times
- Been thanked: 1543 times
- Contact:
Maintain Tesla Gen2/3 OBC firmware
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
-
janosch
- Posts: 329
- Joined: Tue Jun 30, 2020 9:23 am
- Location: London, UK
- Has thanked: 98 times
- Been thanked: 102 times
- Contact:
Re: Maintain Tesla Gen2/3 OBC firmware
We could re-open a charger support thread and I am happy to discuss answers there for a start, so you don't have to get too involved in everyday requests.
For maintenance of the code I wouldn't set out on greenfield development, but if the same problem comes up over and over again I might be able to lend a hand.
For maintenance of the code I wouldn't set out on greenfield development, but if the same problem comes up over and over again I might be able to lend a hand.
New Video: -
jsimonkeller
- Posts: 80
- Joined: Sun Oct 30, 2022 2:21 am
- Has thanked: 4 times
- Been thanked: 9 times
Re: Maintain Tesla Gen2/3 OBC firmware
Hi guys. Can you confirm whether the latest version of the Tesla Gen2/3 OBC firmware is 1.17R?
-
jsimonkeller
- Posts: 80
- Joined: Sun Oct 30, 2022 2:21 am
- Has thanked: 4 times
- Been thanked: 9 times
Re: Maintain Tesla Gen2/3 OBC firmware
In case anyone else is looking for it, the latest version is 1.19R and the bin file is posted by royhen99 at this location:
viewtopic.php?f=10&p=73725#p73725
viewtopic.php?f=10&p=73725#p73725