Open Inverter Data Logger CANLITE

[johu]

Just want to add in most firmware changing NodeId is applied immediately, so even the command to save to flash has to be sent using the new Node Id.

[johu]

3) Connected using a PC (rather than an iPhone). Upon first connection I needed to toggle the node ID from from 1 to 2 and back to 1 again. Didn't need to do this after a power cycle.

Yes this or power cycling triggers a re-download of the json.

Tried unsuccessfully to connect using various IOS devices

Odd, must be some javascript incompatibility I suppose. Any debugging effort welcome. I think the old web interface worked with iPhones.

When scrolling the parameter list (using a PC), it doesn't load the parameters beyond what's initially loaded on the screen

Ah yes, that was a stylesheet issue at some point. Get the latest style.css from github and upload it. Then Ctrl+F5 to reload everything. I think updating ui.js, inverter.js and index.html is worthwhile also.

[P.S.Mangelsdorf]

One further question; do I need to change CAN mappings to use this with my inverter? I only have CAN mapped for my SpeedHut gauges right now.

[johu]

One further question; do I need to change CAN mappings to use this with my inverter? I only have CAN mapped for my SpeedHut gauges right now.

No this doesn't rely on CAN mappings

[P.S.Mangelsdorf]

Great, thanks