3D Printed Charging Plugs and Sockets

Buy and sell
Post Reply
User avatar
Jack Bauer
Posts: 4008
Joined: Wed Dec 12, 2018 5:24 pm
Location: Ireland
Has thanked: 153 times
Been thanked: 1139 times
Contact:
Contact Jack Bauer

3D Printed Charging Plugs and Sockets

Post by Jack Bauer »

This seller has a selection of 3D printed type 2 plugs and sockets. I am using them myself and can attest to the quality.
https://www.ebay.co.uk/itm/123688115268
I'm going to need a hacksaw
Top
arber333
Posts: 3796
Joined: Mon Dec 24, 2018 1:37 pm
Location: Slovenia
Has thanked: 166 times
Been thanked: 413 times
Contact:
Contact arber333

Re: 3D Printed Charging Plugs and Sockets

Post by arber333 »

Jack Bauer wrote: ↑Mon Oct 28, 2019 1:05 pm This seller has a selection of 3D printed type 2 plugs and sockets. I am using them myself and can attest to the quality.
https://www.ebay.co.uk/itm/123688115268
Yes i have his short male plug. It tested ok, but i am sceptical about iron pins. I suggested him to make brass pins for high power plugs.

And of course MOT inspector would give me hell if there would be no CE mark on the socket.
Top
User avatar
mfox
Posts: 151
Joined: Fri Apr 05, 2019 9:56 pm
Location: Croatia
Been thanked: 5 times

Re: 3D Printed Charging Plugs and Sockets

Post by mfox »

Tnx Damien for post :D

Im doing brass pins now :D
Top
User avatar
mfox
Posts: 151
Joined: Fri Apr 05, 2019 9:56 pm
Location: Croatia
Been thanked: 5 times

Re: 3D Printed Charging Plugs and Sockets

Post by mfox »

this is my current EV

Image
Top
xp677
Posts: 442
Joined: Sat Jul 27, 2019 10:53 am
Location: UK
Has thanked: 1 time
Been thanked: 15 times

Re: 3D Printed Charging Plugs and Sockets

Post by xp677 »

arber333 wrote: ↑Mon Oct 28, 2019 3:39 pm And of course MOT inspector would give me hell if there would be no CE mark on the socket.
Easy to add a CE mark....Croatia Export ;)
Top
Post Reply

Return to “Classifieds”