Update via wifi fails

[Kitlacey]

Hi

I have a similar problem, and no tools, I've been doing all this over wifi.

I have the same "Firmware" and "file system" update boxes. The inverter is currently attached to an SDU and installed in the vehicle. Can I do anything over wifi, or do I have to remove the board?

You are nearly there! There is no bin file for assets, you just upload the html/css/js/png assets directly.
The *.bin file is updated via the button once you have index.html & index.js in place.

https://openinverter.org/wiki/Olimex_MO ... bInterface

[janosch]

Can you open developer console in the browser and go through the upload process and see if there are multiple requests coming through?

Which firmware are you trying to flash? Fellten or OI?

You might have to take it out, but it is worth trying a few things over wifi first.

[johu]

Finally put Janosches fix in place
https://github.com/jsphuebner/esp8266-w ... 47da6fa7c5