Hello,
I have a hyundai kona ev. 64 Kw from 2019 with a 7.2 Kw 1 phase charger. Is it possible to screw the 11 Kw 3 phase charger on here? The dealer says no, because the hardware is not prepared for this.Which hardware?
Hyundai kona charger
-
uhi22
- Posts: 934
- Joined: Mon Mar 14, 2022 3:20 pm
- Location: Ingolstadt/Germany
- Has thanked: 135 times
- Been thanked: 529 times
Re: Hyundai kona charger
Just guessing: Two missing phases in the CCS inlet and cable harness and connector.
Github: http://github.com/uhi22 --- Patreon: https://www.patreon.com/uhi22
-
EV_Builder
- Posts: 1200
- Joined: Tue Apr 28, 2020 3:50 pm
- Location: The Netherlands
- Has thanked: 17 times
- Been thanked: 35 times
- Contact:
Re: Hyundai kona charger
The configuration of the vehicle needs to know this charger. So you need dealership software etc. to modify it. This with the assumption that connectors and signals are all equal between the 2 chargers.
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
see http://www.wdrautomatisering.nl for bespoke BMS modules.