olimex GD32-H103 [SOLVED]

[chentron]

olimex discontinued or have no stock for the olimex STM32-h103 that is included in the old v2 johannes kit.
They only sell GD32-h103.
Because a problem with my STM32-h103 (that is other history) I bought a GD32-h103 but I can not flash because STM32cube software doesnt recognise the chip. Same with zflash app in android.
I have the original usb cable from the v2 kit, and a stlink-v2
So my question is if i have other way to flash the GD32-h103, and if this could do same function in the v2 inverter from johannes.
thanks

[Pete9008]

Depends how comfortable you are with command line tools, OpenOCD could probably do it?

[chentron]

command line tools is not a big problem as the 220 pages of openocd users manual.
i choose to buy a new stm chip and change into the new board and also avoid compatibilty issues with the code

[EV_Builder]

the ST-Link application, old style, works too in windows.

[chentron]

this was a old thread... I did not got program the GD32-H103 because STlink app is not compatible, so i finally got stock for STM32-chip, unmount the GD32 chip and mount the STM32 and surprise it works.

[johu]

Also the STM32-H103 is back in stock