Going out on a limb, mostly because [Sgt Schultz voice]I know nothing[/voice] about Outlander motors and I do not see any glaringly obvious reasons for what you describe...Bram wrote: ↑Tue Mar 09, 2021 7:21 pm I've mounted my outlander motor to the gearbox and fitted it into my car (VW Polo mk1)
last days I'm testing the motor and inverter, watched hours on video's and found my (i believe) the correct "syncofs".
but now mounted, with wheels off the ground, the motor rarely start out of itself, it always needs a tiny push on the wheel before spinning.
while spinning I can make him spin slowly and super fast with out weird noise, very smooth. (with manualid 0.1 - manaualiq 5.0) but it doesn't start itself (in manual nor closed loop) , I hear the inverter make noise, but wheels doesn't spin.
It would seem to me one might want to double check the motor data, I was under the impression there are no odd numbers in poles etc. In any event, you should not need to give a motor a push to start, so clearly something is not right.