Hi
Very newbi here
Is this board alone enough to control leaf inverter
"openinverter.org Brain Board Rev 3 - community edition
Product Code: bb3-cmy
Availability: 2
166.60€
Ex Tax: 140.00€ "
Brain Board Rev 3
-
mrmriza@msn.com
- Posts: 5
- Joined: Wed Feb 03, 2021 8:05 pm
-
johu
- Site Admin
- Posts: 5791
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1025 times
- Contact:
Re: Brain Board Rev 3
Assuming you talk about the Gen2 Leaf inverter you'd need this: https://openinverter.org/shop/index.php ... duct_id=57
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
-
Bratitude
- Posts: 784
- Joined: Thu Jan 02, 2020 7:35 pm
- Location: Canada
- Has thanked: 58 times
- Been thanked: 176 times
- Contact:
Re: Brain Board Rev 3
mrmriza@msn.com wrote: ↑Wed Feb 03, 2021 8:12 pm Hi
Very newbi here
Is this board alone enough to control leaf inverter
"openinverter.org Brain Board Rev 3 - community edition
Product Code: bb3-cmy
Availability: 2
166.60€
Ex Tax: 140.00€ "
Take a read threw the Gen2 leaf wiki page.
You’ll understand what is required
https://openinverter.org/wiki/Nissan_Leaf_Gen2_Board
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
-
mrmriza@msn.com
- Posts: 5
- Joined: Wed Feb 03, 2021 8:05 pm
