For those interested I have released V4 of the small drive unit hardware on Github :
https://github.com/damienmaguire/Tesla-Front-Drive-Unit
Now has onboard WiFi.
New V4 Small drive unit hardware
- Jack Bauer
- Posts: 3563
- Joined: Wed Dec 12, 2018 5:24 pm
- Location: Ireland
- Has thanked: 1 time
- Been thanked: 87 times
- Contact:
- johu
- Site Admin
- Posts: 5874
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 172 times
- Been thanked: 1089 times
- Contact:
Re: New V4 Small drive unit hardware
Thought these two videos could fit in here.
Dave Jones did a video on EMI radiation of 4-layer vs. 2 layer boards:
I did a video on watchdog and reset pin configuration: (might be worthwhile updating your schematic)
Dave Jones did a video on EMI radiation of 4-layer vs. 2 layer boards:
I did a video on watchdog and reset pin configuration: (might be worthwhile updating your schematic)
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
- Jack Bauer
- Posts: 3563
- Joined: Wed Dec 12, 2018 5:24 pm
- Location: Ireland
- Has thanked: 1 time
- Been thanked: 87 times
- Contact:
Re: New V4 Small drive unit hardware
Thanks Johannes. I learned the benefits of 4 layer board the hard way:)
I'm going to need a hacksaw