A Germanman called Michael Zettel found a problem with switching the mux on Tesla firmware. Since the mux0 pin is the err_out pin on other boards and err_out is constantly held at 0 when there is no error, the mux did not really switch to those channels.
There will be a fix in the next revision, I'm a bit surprised (and glad) that it hasn't caused real problems so far.
Bug in temperature reading of Tesla firmware
-
johu
- Site Admin
- Posts: 6621
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 344 times
- Been thanked: 1486 times
- Contact:
Bug in temperature reading of Tesla firmware
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9